The Challenger B2065-4 replacement hardware is the direct replacement for the Challenger lift it came off of. This is the genuine Challenger part — same fit and same working specification as the one already on your lift. Ordering the Challenger replacement hardware from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.
Specifications
- Part number: B2065-4
- Brand: Challenger
- Type: Genuine OEM replacement hardware
- Fits: CL10, CL10A, CL10DPC, CL10V3, CL12, CL12A, CL16, CL20, E12, E15, SA10, VLE10
Hardware is where lift failures are born. A pin that has worn oval lets its sheave run crooked; the crooked sheave saws at the cable; and a five-dollar pin has now written a quote for cables and sheaves. Springs lose tension and a lock pawl stops returning. A bushing thins out and the clunk everyone ignores becomes the slop that rounds off the bore it sits in. None of these parts fail dramatically — they just get a little loose, a little rounder, a little weaker, and pass the damage up to whatever they located or supported. Replacing hardware at the first sign of wear is how the expensive parts on a lift get to live out their full lives.
Related parts for this lift
The parts below are commonly ordered alongside this one — cables, sheaves, seals, and hardware wear on similar schedules, and most repairs go faster when the whole set is done in one visit.
Ordering the right revision
Before this goes in the cart, grab two things off your lift: the model number and the serial number, both on the manufacturer's plate. The serial matters more than most people expect — lift makers revise components between production runs without renaming the lift, and the run your serial falls in determines which revision of this part is correct.
If you are working from a failed part rather than a plate, measure what you have and photograph how it mounts. Send that to us along with the lift brand, and we will check it against the same parts breakdowns our own techs use in the field before you commit to the order.
When hardware comes out, read it. An ovaled pin means its bore is probably ovaled too — check the hole, not just the pin. A stretched spring means something was binding for it to fight. Bright metal dust around a bushing or bearing means it has been grinding, so inspect what it rides in. New hardware in a worn bore is a short-term repair with a long-term invoice.
Never reuse a bent pin, a stretched spring, or a mushroomed piece of hardware because it still technically fits — and never substitute generic hardware-store fasteners for load-bearing lift hardware. Grade and dimensions exist for a reason on a machine that holds vehicles in the air.
Why buy your Challenger replacement hardware from Auto Lift Services
We install, inspect, and repair Challenger lifts every week — the B2065-4 is a part we handle in the shop, not a random SKU we drop-ship.
- The phone answers if you have a question mid-install — call 800-674-9302.
- We confirm the right part for your lift's serial and production year before you order.
- Every part ships as genuine Challenger — no aftermarket substitution unless you specifically ask for an aftermarket equivalent.
If you also need companion wear items — cables, sheaves, seals, hardware — for the same repair, use our parts lookup and we will build the whole kit for your lift so you order once and finish the job.
Challenger B2065-4 M6 Serrated Flanged Hex Nut
Inspect your lift.
Free. In your browser.
Our free lift inspection walks your lift end to end and shows you exactly which parts you need — right on the exploded diagram. No signup, no charge.