The Rotary T130660 replacement hardware is the direct replacement for the Rotary lift it came off of. Cross-referenced as ALS-7537-00, it is the genuine Rotary part — same part number, same fit, and same working specification as the one already on your lift. Ordering the Rotary replacement hardware from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.
Specifications
- Part number: ALS-7537-00
- Brand: Rotary
- Type: Genuine OEM replacement hardware
Hardware is where lift failures are born. A pin that has worn oval lets its sheave run crooked; the crooked sheave saws at the cable; and a five-dollar pin has now written a quote for cables and sheaves. Springs lose tension and a lock pawl stops returning. A bushing thins out and the clunk everyone ignores becomes the slop that rounds off the bore it sits in. None of these parts fail dramatically — they just get a little loose, a little rounder, a little weaker, and pass the damage up to whatever they located or supported. Replacing hardware at the first sign of wear is how the expensive parts on a lift get to live out their full lives.
Related parts for this lift
The parts below are commonly ordered alongside this one — cables, sheaves, seals, and hardware wear on similar schedules, and most repairs go faster when the whole set is done in one visit.
- Spring - Rotary FJ2420
- Pin - Rotary FJ862
- Pin Holder - Rotary FJ863
- Gear Bolt - Rotary - 40200
- Amp In-Line Fuse - Rotary - FA9126-2 6
- 5" Nesting Height Extension 1-1/2" Pin - Rotary - T130661
Check your lift's serial before ordering
The most common reason a lift part comes back is not a defect — it is a revision mismatch. Manufacturers change sub-parts between production runs while keeping the same lift model name, so "it fits my lift model" is not always enough. The model plate carries the serial number that pins your lift to a specific run, and that is the number that settles which version of this part belongs on your lift.
Can't find the plate? Measure the old part — overall length, bolt-hole spacing, thread size on anything threaded — and photograph it from a couple of angles. Send that with your lift's brand and rough age and we will match it against the parts breakdowns we service from every week.
When hardware comes out, read it. An ovaled pin means its bore is probably ovaled too — check the hole, not just the pin. A stretched spring means something was binding for it to fight. Bright metal dust around a bushing or bearing means it has been grinding, so inspect what it rides in. New hardware in a worn bore is a short-term repair with a long-term invoice.
Never reuse a bent pin, a stretched spring, or a mushroomed piece of hardware because it still technically fits — and never substitute generic hardware-store fasteners for load-bearing lift hardware. Grade and dimensions exist for a reason on a machine that holds vehicles in the air.
Why buy your Rotary replacement hardware from Auto Lift Services
We install, inspect, and repair Rotary lifts every week — the ALS-7537-00 is a part we handle in the shop, not a random SKU we drop-ship.
- The phone answers if you have a question mid-install — call 800-674-9302.
- We confirm the right part for your lift's serial and production year before you order.
- Every part ships as genuine Rotary — no aftermarket substitution unless you specifically ask for an aftermarket equivalent.
If you also need companion wear items — cables, sheaves, seals, hardware — for the same repair, use our parts lookup and we will build the whole kit for your lift so you order once and finish the job.
About this t130660 nesting height
Sourcing the correct t130660 nesting height is not the spot a shop wants to gamble. This piece sits inside a load path the lift manufacturer engineered to specific tolerances, and a substitute that looks close but is off by even a small margin can transfer load onto a neighboring component that was not designed for it. We stock this exact part to the OEM specification the original manufacturer publishes, which is why techs who have been through a bad aftermarket cycle keep coming back to us for the same replacement whenever their next need comes up.
Technical specification & installation notes
Cycle life on this piece depends heavily on operating conditions. In a typical commercial repair shop running 6-10 lifts per day, the t130660 nesting height should deliver five to eight years of service before showing measurable wear against the OEM inspection specification. In a high-volume tire or alignment shop running 20+ lifts per day per bay, expect service every three to five years. It is designed to be a serviceable component; when it does wear it wears within safe operating margins that trigger visible symptoms — drift, uneven wear, minor leakage — well before failure becomes a safety issue.
Shipping & ordering
Placing an order online is the fastest path — add to cart, check out, done. If the shop needs a purchase order, net-30 terms, or a formal quote for a fleet-service contract, our accounts team handles those via email at [email protected] or by phone at 800-674-9302. Volume pricing on the t130660 nesting height kicks in at 10+ pieces on the same order for common wear items. Ask about the volume rate specifically before you check out — many fleet buyers stock 6-12 pieces at a time and the discount is meaningful over that shelf life.
Warranty coverage
Every t130660 nesting height sold through Automotive Lift Services carries a one-year manufacturer-defect warranty. If it fails within that window due to a defect in material or workmanship, we replace it at no charge. Damage from improper installation, use outside the lift's rated capacity, side-loading, or modifications to the parent lift are not covered. The warranty is documented on your original order receipt — retain that record for the coverage period. To submit a warranty claim, contact us with the order number and a photo of the failure at [email protected].
Cross-reference & fitment
Fitment on the t130660 nesting height is verified against the lift serial number when the order comes in. Even inside one manufacturer's catalog, a lift model built in one production year can carry subtle revisions from the same model built two or three years later. Sending us the lift serial number when you place the order — either in the order notes or in a follow-up email — lets us verify the piece against that specific serial's parts list. That five-minute step catches revision mismatches before shipping and prevents the delay of an incorrect delivery.
Questions about the t130660 nesting height? Call our parts desk at 800-674-9302 or email [email protected]. We ship nationwide from our Iowa warehouse and answer fitment questions within one business day.
3-1/2" Nesting Height Extension 1-1/2" Pin - Rotary - T130660
Inspect your lift.
Free. In your browser.
Our free lift inspection walks your lift end to end and shows you exactly which parts you need — right on the exploded diagram. No signup, no charge.