The BendPak 5174705 is the direct-replacement drive-up ramp for the BendPak lift it came off of — the genuine part, same fit and same working specification as the one already on your lift. Ordering the BendPak drive-up ramp from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.

Specifications

• Part number: 5174705
• Brand: BendPak
• Type: Genuine OEM drive-up ramp
• Fits: HD9

A worn structural part is the difference between a car that sits solid and one that slides off a lift arm. A crushed pad, a bent adapter lip, an egg-shaped pin hole — each one lets the contact point shift under load, and a vehicle that shifts on the arms is a vehicle that can come off them. These parts are inexpensive next to the bodywork of a dropped car, or the person standing beside it.

What lifts this drive-up ramp fits

This drive-up ramp fits the lift models below. Click a model to open its visual parts breakdown — the exploded drawing with every part numbered, so you can confirm this is the right part for your exact lift before you order.

• HD9

Replacing your drive-up ramp

Replacing column hardware — anchors, arm-pin retainers, slide blocks, fasteners — is about restoring the tight, no-play fit the structure was built with. Use the correct grade and torque, and confirm the column sits flat and solid to the floor afterward. The complete procedure lays out what to check and in what order. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.

Find the right part for your lift

Landed here but not 100% sure it is your part? Grab the model and serial from the data plate and open our parts lookup for the visual breakdown — the manufacturer-style drawing with every item numbered so you can match yours exactly. Plate missing? our guide to finding your model number helps, and we identify lifts from photos every week if you would rather ask.

Signs this part is worn out

Go over the column hardware and anchors. Every anchor bolt should be tight and the base plate flat to the floor — a column you can rock, or an anchor backed out with a gap under the plate, is a serious problem. Check arm-pin retainers, gate stops, and fasteners for looseness, stripped threads, and missing pins. Loose column hardware lets the whole structure move under load.

Parts commonly replaced at the same time

Smart to replace the group: contact points wear together, so pads, adapters, and their pins are best done in one pass. It keeps the lift level and the vehicle secure. We will build the matched structural kit for your model so you are not chasing one worn pad at a time.

Safety notes

Structural wear sneaks up: a pad flattens, a hole elongates, a ramp lip curls, and one day the vehicle is not sitting where it should. Treat these as safety parts, not cosmetics. Replace them before they let a load shift, and confirm every mounting point is tight and true before the lift carries weight.

Before you order

Before ordering, confirm your lift's model and serial and check how many of the part you need — pads and adapters usually go in sets of four, and replacing one worn one still leaves three worn. Match the old part's shape and mounting against what you order, and call if the fit is not obvious.

Confirm this is the right part before you order

Lift manufacturers revise parts mid-production without changing the model name, so the same lift bought two years apart can take two different revisions of the same component. Before you order, find the model plate on the lift — on most 2-post lifts it rides on one of the columns at eye level, on 4-post lifts it is usually on a column or the power-unit side runway — and note the full model number and serial. The serial dates the lift to a production run, and that is what decides which revision fits.

If the plate is painted over or missing, take a photo of the part you are replacing next to a tape measure and send it to us. Between the dimensions, the mounting pattern, and what lift it came off of, we can almost always identify the exact part before you spend money on the wrong one.

Why buy your BendPak drive-up ramp from Auto Lift Services

We install, inspect, and repair BendPak lifts every week — the 5174705 is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.