The BendPak 5180180 electrical control component is the direct replacement for the BendPak lift it came off of. This is the genuine BendPak part — same fit and same working specification as the one already on your lift. Ordering the BendPak electrical control component from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.

Specifications

• Part number: 5180180
• Brand: BendPak
• Type: Genuine OEM electrical control component

A small electrical fault left alone becomes a bigger, more expensive one. A loose lug that arcs will eventually burn the terminal, then the wire, then the component it feeds. A chattering contactor hammers the motor with partial voltage until the windings cook. Chasing down a hot connection or a pitted switch early is a cheap fix; letting it run until it melts something takes out the motor or the whole control box.

The electrical side of a lift is what turns wall power into lifting motion: the disconnect and breaker feed a switch or push-button, which energizes a contactor, which sends power to the motor that spins the pump. Limit switches and safety cutoffs sit in the circuit to stop the lift at the top or if an overhead bar is hit. When the lift won't run, the fault is somewhere in that chain — and it's often electrical, not hydraulic.

Replacing your electrical control component

Replacing a contactor or switch means matching voltage and rating, killing power at the breaker, and landing the wires exactly as they came off — photograph the connections first. Then confirm the lift runs only while the button is held and stops the instant it's released. The step-by-step guide covers the wiring and the checks. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.

Find the right part for your lift

The surest way to get the right part is to work from your lift's own breakdown. open our parts lookup, choose your model, and every part is mapped on the drawing with its number and price. If you cannot find the model plate, our guide to finding your model number explains where each lift type hides it, and our phone line is open if you want a hand.

Signs of an electrical fault

Check the push-button or control switch for hold-to-run behavior and clean action. The lift should move only while the button is held and stop the instant it's released. A button that sticks, that runs on after release, or that needs several presses to make contact is worn or damaged. Because the control is a safety part, a switch that won't reliably stop the lift is a replace-now item.

Parts commonly replaced at the same time

Order the companions for an electrical repair by voltage and phase, not by guess. Control components share a circuit and a service life, so replacing the obvious failure while checking the related parts keeps the lift reliable. Give us the data-plate details and we will match the set.

Safety notes

Treat every lift electrical job as live until you have locked out and tested for zero voltage. Contactors, switches, and relays sit in the safety chain; get one wrong and an interlock stops protecting anyone. Follow the wiring diagram for your production year exactly, and hand off anything you are unsure of.

Before you order

Get the electrical order right by the numbers: model, serial, voltage, and phase, all from the data plate. Components differ between single- and three-phase builds of the same lift. Have the old part's ratings handy and we will confirm the right one before it ships.

Confirm this is the right part before you order

Lift manufacturers revise parts mid-production without changing the model name, so the same lift bought two years apart can take two different revisions of the same component. Before you order, find the model plate on the lift — on most 2-post lifts it rides on one of the columns at eye level, on 4-post lifts it is usually on a column or the power-unit side runway — and note the full model number and serial. The serial dates the lift to a production run, and that is what decides which revision fits.

If the plate is painted over or missing, take a photo of the part you are replacing next to a tape measure and send it to us. Between the dimensions, the mounting pattern, and what lift it came off of, we can almost always identify the exact part before you spend money on the wrong one.

Why buy your BendPak electrical control component from Auto Lift Services

We install, inspect, and repair BendPak lifts every week — the 5180180 is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.