The BendPak 5323014 electrical control component is the direct replacement for the BendPak lift it came off of. This is the genuine BendPak part — same fit and same working specification as the one already on your lift. Ordering the BendPak electrical control component from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.

Specifications

• Part number: 5323014
• Brand: BendPak
• Type: Genuine OEM electrical control component

The control gear — switch, contactor, overload, limit switches — is what makes the lift safe to operate, not just able to run. The button has to be hold-to-run so the lift stops when you let go; the overload has to trip before the motor cooks; the limit switch has to cut power at full height. When a control part fails, the risk isn't only a lift that won't work — it's a lift that won't stop when it should.

The electrical system feeds the motor, and the motor drives the pump — so an electrical fault often looks like a hydraulic one and vice versa. A lift that won't rise might be a dead capacitor, a burned contactor, a tripped limit switch, or a pump that's seized and stalling the motor. The wiring, the switch, the contactor, the motor, and the pump are one chain; trace it in order instead of guessing.

Replacing your electrical control component

Servicing the safety cutouts — limit switch, overhead shut-off, overload — is about confirming the lift stops on its own when it's supposed to, not just that it runs. Replace the failed device, then test each cutout deliberately. Since these are what make the lift safe to operate, the step-by-step procedure is worth following start to finish. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.

Find the right part for your lift

Landed here but not 100% sure it is your part? Grab the model and serial from the data plate and open our parts lookup for the visual breakdown — the manufacturer-style drawing with every item numbered so you can match yours exactly. Plate missing? our guide to finding your model number helps, and we identify lifts from photos every week if you would rather ask.

Signs of an electrical fault

If the lift runs sometimes and not others, look for a loose or corroded connection. Intermittent operation is the classic signature of a bad connection — a loose lug, a corroded terminal, a pitted switch contact that makes only when it feels like it. With the power safely off, check every terminal for tightness and every contact for pitting and discoloration. Intermittent almost always means connection, not component.

Parts commonly replaced at the same time

Plan the electrical repair as a circuit, not a single part. The components around a failure often share its age, and doing them together while power is off is safer and cheaper than repeat visits. Give us your lift's configuration and we will assemble the matched set.

Safety notes

Before the cover comes off, the power comes off — and gets verified off. Lift controls tie the motor, the interlocks, and the shutoff together, so a careless connection can make a lift move when it should not. Match the diagram, respect the safety circuit, and get help on anything outside your comfort zone.

Before you order

Ordering tip: electrical components are specific to the lift's voltage and phase, so read the plate before you buy. A 208-230V single-phase lift and a three-phase version of the same model do not share the same contactor or motor. Send the markings off the old part and we will confirm the match.

Check your lift's serial before ordering

The most common reason a lift part comes back is not a defect — it is a revision mismatch. Manufacturers change sub-parts between production runs while keeping the same lift model name, so "it fits my lift model" is not always enough. The model plate carries the serial number that pins your lift to a specific run, and that is the number that settles which version of this part belongs on your lift.

Can't find the plate? Measure the old part — overall length, bolt-hole spacing, thread size on anything threaded — and photograph it from a couple of angles. Send that with your lift's brand and rough age and we will match it against the parts breakdowns we service from every week.

Why buy your BendPak electrical control component from Auto Lift Services

We install, inspect, and repair BendPak lifts every week — the 5323014 is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.