The BendPak 5525093 electrical control component is the direct replacement for the BendPak lift it came off of. This is the genuine BendPak part — same fit and same working specification as the one already on your lift. Ordering the BendPak electrical control component from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.

Specifications

• Part number: 5525093
• Brand: BendPak
• Type: Genuine OEM electrical control component

The control gear — switch, contactor, overload, limit switches — is what makes the lift safe to operate, not just able to run. The button has to be hold-to-run so the lift stops when you let go; the overload has to trip before the motor cooks; the limit switch has to cut power at full height. When a control part fails, the risk isn't only a lift that won't work — it's a lift that won't stop when it should.

The electrical system feeds the motor, and the motor drives the pump — so an electrical fault often looks like a hydraulic one and vice versa. A lift that won't rise might be a dead capacitor, a burned contactor, a tripped limit switch, or a pump that's seized and stalling the motor. The wiring, the switch, the contactor, the motor, and the pump are one chain; trace it in order instead of guessing.

Replacing your electrical control component

A motor replacement hinges on matching the data tag — voltage, phase, and horsepower — before anything else, then disconnecting power, transferring the wiring, and coupling it to the pump. Verify rotation and that the motor comes up to speed without tripping the overload. Because it's high-current work, walk through the complete procedure before you start. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.

Find the right part for your lift

Not certain this is the exact part your lift needs? Start with your lift's model and serial off the data plate, then open our parts lookup to see the visual parts breakdown for your model — the exploded drawing with every part numbered and priced. If your plate is missing or unreadable, our guide to finding your model number walks through where to find it, or send us a photo and we will identify the lift for you.

Signs of an electrical fault

If the lift runs sometimes and not others, look for a loose or corroded connection. Intermittent operation is the classic signature of a bad connection — a loose lug, a corroded terminal, a pitted switch contact that makes only when it feels like it. With the power safely off, check every terminal for tightness and every contact for pitting and discoloration. Intermittent almost always means connection, not component.

Parts commonly replaced at the same time

The parts near an electrical fault are worth a look while the cover is off — a chattering contactor, a marginal switch, brittle wiring. Handling them together on a de-energized circuit beats repeated trips into the panel. Tell us your model, voltage, and phase and we will confirm the related components.

Safety notes

The control system is a safety system, so respect it. De-energize and verify before servicing, keep line and low-voltage wiring where the diagram puts them, and never bypass an interlock to get a lift running. If the fix involves the overhead shutoff or the lock circuit, be certain it works before the lift carries a vehicle.

Before you order

Before you buy an electrical part, pull the voltage and phase off the plate along with model and serial — they determine the fit. A wrong-phase contactor or motor is a guaranteed return. Share the old part's markings and we will match the correct component for your lift's control system.

Check your lift's serial before ordering

The most common reason a lift part comes back is not a defect — it is a revision mismatch. Manufacturers change sub-parts between production runs while keeping the same lift model name, so "it fits my lift model" is not always enough. The model plate carries the serial number that pins your lift to a specific run, and that is the number that settles which version of this part belongs on your lift.

Can't find the plate? Measure the old part — overall length, bolt-hole spacing, thread size on anything threaded — and photograph it from a couple of angles. Send that with your lift's brand and rough age and we will match it against the parts breakdowns we service from every week.

Why buy your BendPak electrical control component from Auto Lift Services

We install, inspect, and repair BendPak lifts every week — the 5525093 is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.