The BendPak 5905940 safety decal set is the direct replacement for the BendPak lift it came off of. This is the genuine BendPak part — same fit and same working specification as the one already on your lift. Ordering the BendPak safety decal set from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.

Specifications

• Part number: 5905940
• Brand: BendPak
• Type: Genuine OEM safety decal set
• Fits: BENDPAK-5260047-HDS-18EA, BENDPAK-5260079-MDS-6K, BENDPAK-5260231-SP-7X, BENDPAK-5260512-HDS-14LSXE, BENDPAK-5260519-HDSO-14, BENDPAK-5260520-HDSO14AX, BENDPAK-5260527-HD-9AE, BENDPAK-5261000-MDS-6KF, HDS-35, HDS-35X, HDSO-14, HDSO-14LSX

Skipping the paperwork parts has real consequences. A lift without legible capacity and safety decals is out of compliance and leaves an operator guessing at the load limit; a lift worked on without the manual gets specs and torque values guessed instead of looked up. These aren't cosmetic. The decal and the manual are how the next person — an operator, an inspector, a tech — knows what the lift can do and how to service it right.

What lifts this safety decal set fits

This safety decal set fits the lift models below. Click a model to open its visual parts breakdown — the exploded drawing with every part numbered, so you can confirm this is the right part for your exact lift before you order.

• BENDPAK-5260047-HDS-18EA
• BENDPAK-5260079-MDS-6K
• BENDPAK-5260231-SP-7X
• BENDPAK-5260512-HDS-14LSXE
• BENDPAK-5260519-HDSO-14
• BENDPAK-5260520-HDSO14AX
• BENDPAK-5260527-HD-9AE
• BENDPAK-5261000-MDS-6KF
• HDS-35
• HDS-35X

Replacing your safety decal set

Getting a support part right — an airline, a decal, a fastener, a clip — is quick, but it still has to match the equipment and go in the correct spot to do its job. Confirm the fit, install it, and check it functions before you rely on it. For that reason the full walkthrough is worth a read start to finish. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.

Find the right part for your lift

If you are not sure this part matches your setup, the fastest check is the visual breakdown: open our parts lookup, pick your model, and match your part against the drawing where every item is numbered. Can't read the model plate? our guide to finding your model number shows exactly where it lives on each lift type, and we are a phone call away if you would rather have us confirm it.

Signs it's time to replace it

For any replacement part, verify it matches the original before it goes on — size, rating, mounting, and function. Set the new part next to the old one and confirm they're the same where it counts. A support part that's close but not right — a slightly different fitting, a lower-grade bolt, an off-size clip — either won't do its job or won't fit at all. Match it to what came off.

Parts commonly replaced at the same time

If you are ordering this, it is worth asking what else your lift is due for while you have us on the phone — the wear items, the safety parts, the pieces that commonly go together on your model. One order and one shipment beats several. Tell us your lift and we will flag what usually needs attention.

Safety notes

Even the simple parts on a lift have a job in keeping it safe and compliant, so fit the correct one and install it right. Follow the manufacturer's guidance for your model, keep required decals legible and in place, and never improvise a substitute for a part that is there for a reason.

Before you order

Confirm model and serial before you order, and describe what you need it for. Whether it is required labeling or a rated accessory, the correct version depends on your lift. We will verify the match so you get the right part the first time.

Confirm this is the right part before you order

Lift manufacturers revise parts mid-production without changing the model name, so the same lift bought two years apart can take two different revisions of the same component. Before you order, find the model plate on the lift — on most 2-post lifts it rides on one of the columns at eye level, on 4-post lifts it is usually on a column or the power-unit side runway — and note the full model number and serial. The serial dates the lift to a production run, and that is what decides which revision fits.

If the plate is painted over or missing, take a photo of the part you are replacing next to a tape measure and send it to us. Between the dimensions, the mounting pattern, and what lift it came off of, we can almost always identify the exact part before you spend money on the wrong one.

Why buy your BendPak safety decal set from Auto Lift Services

We install, inspect, and repair BendPak lifts every week — the 5905940 is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.