The BendPak 5905951 safety decal set is the direct replacement for the BendPak lift it came off of. This is the genuine BendPak part — same fit and same working specification as the one already on your lift. Ordering the BendPak safety decal set from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.

Specifications

• Part number: 5905951
• Brand: BendPak
• Type: Genuine OEM safety decal set
• Fits: BENDPAK-5260079-MDS-6K, BENDPAK-5260231-SP-7X, BENDPAK-5260580-PL-18000, BENDPAK-5261000-MDS-6KF, LR-5T, SP-7XF, SP-7XL, SP-7XLF, XPR-10AS, XPR-10AS-168, XPR-10AXLS, XPR-10AXLS-181

On lifts that use air — for lock release or pneumatic engagement — the air supply is part of the safety system, not an accessory. A compressor or regulator that can't hold steady pressure means the locks don't actuate the way they're supposed to. The air side is simple, but it has one job that matters: deliver clean, regulated pressure on demand so the lock mechanism does exactly what the operator asks.

What lifts this safety decal set fits

This safety decal set fits the lift models below. Click a model to open its visual parts breakdown — the exploded drawing with every part numbered, so you can confirm this is the right part for your exact lift before you order.

• BENDPAK-5260079-MDS-6K
• BENDPAK-5260231-SP-7X
• BENDPAK-5260580-PL-18000
• BENDPAK-5261000-MDS-6KF
• LR-5T
• SP-7XF
• SP-7XL
• SP-7XLF
• XPR-10AS
• XPR-10AS-168

Replacing your safety decal set

Applying new decals is simple but not trivial: the surface has to be clean and dry, and the capacity and safety labels have to go in their correct, visible locations so an operator can read them at a glance. Take your time positioning them. The full procedure covers placement and prep. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.

Find the right part for your lift

If you are not sure this part matches your setup, the fastest check is the visual breakdown: open our parts lookup, pick your model, and match your part against the drawing where every item is numbered. Can't read the model plate? our guide to finding your model number shows exactly where it lives on each lift type, and we are a phone call away if you would rather have us confirm it.

Signs it's time to replace it

For airlines, run the length looking for cracks, kinks, chafe points, and oil-swollen or brittle sections. Check every push-connect and threaded fitting for leaks — a quick spray of soapy water shows bubbles at a leak. Pull the lock release and confirm air actuates the pawls promptly; a soft, slow, or uneven release points to a leaking line, a bad fitting, or low supply pressure.

Parts commonly replaced at the same time

While you are ordering, let us check what commonly goes with it on your lift. Bundling the related parts into one shipment saves freight and time, and we can see the full breakdown for your model to make sure nothing obvious is missed. Just give us the model and serial.

Safety notes

Fit the right part and follow the manual — that holds even for the minor components. Required safety and instruction decals must stay legible for ALI compliance, and any accessory in the load path has to be rated for the job. When in doubt about what your model takes, ask before you order.

Before you order

Order by model and serial so we can match the correct version, and let us know the application. For decals and accessories especially, using the item specified for your lift keeps it compliant and safe. We will confirm the fit before it leaves the shelf.

Not sure this fits? Here's how to check

Pull the number off your lift's model plate first — model and serial both. Manufacturers run mid-cycle revisions that keep the model name but change hardware, so two lifts with the same name on the column can take different parts. The serial is what removes the guesswork.

Second check: compare the old part against this listing before you order. Length, mounting pattern, and thread sizes tell most of the story. If anything doesn't line up, or if the old part is too worn or broken to measure, call us with photos — we work on these lifts every week and can usually confirm fit from a picture and the lift's serial faster than you can dig through a parts diagram.

Why buy your BendPak safety decal set from Auto Lift Services

We install, inspect, and repair BendPak lifts every week — the 5905951 is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.