The Challenger 10347-10 lift adapter is the direct replacement for the Challenger lift it came off of. This is the genuine Challenger part — same fit and same working specification as the one already on your lift. Ordering the Challenger lift adapter from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.

Specifications

• Part number: 10347-10
• Brand: Challenger
• Type: Genuine OEM lift adapter

A worn structural part is the difference between a car that sits solid and one that slides off a lift arm. A crushed pad, a bent adapter lip, an egg-shaped pin hole — each one lets the contact point shift under load, and a vehicle that shifts on the arms is a vehicle that can come off them. These parts are inexpensive next to the bodywork of a dropped car, or the person standing beside it.

Replacing your lift adapter

Replacing an adapter is usually drop-in, but the fit is everything: the new adapter has to reach the correct height, seat square on the pinch weld or frame, and clear the rocker. Set it in place and load-test it before trusting a car to it. The step-by-step guide covers how to confirm it's seating right. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.

Find the right part for your lift

Landed here but not 100% sure it is your part? Grab the model and serial from the data plate and open our Challenger parts lookup for the visual breakdown — the manufacturer-style drawing with every item numbered so you can match yours exactly. Plate missing? our guide to finding your model number helps, and we identify lifts from photos every week if you would rather ask.

Signs this part is worn out

Go over the column hardware and anchors. Every anchor bolt should be tight and the base plate flat to the floor — a column you can rock, or an anchor backed out with a gap under the plate, is a serious problem. Check arm-pin retainers, gate stops, and fasteners for looseness, stripped threads, and missing pins. Loose column hardware lets the whole structure move under load.

Parts commonly replaced at the same time

Order structural parts in the set they belong to. A single fresh pad among three flat ones does not restore even support, and the pins and hardware around a worn part are usually due too. We keep the right versions for your lift and can assemble the full contact-point kit in one order.

Safety notes

Do not overlook the structural wear items just because they are simple. A worn arm pad or a cracked ramp weld can let a vehicle walk or drop, and they fail quietly until the day they do not. Inspect contact points every service and replace anything crushed, cracked, or bent before the next lift.

Before you order

A little prep saves a wrong part: confirm model and serial, count how many you need, and match the mounting against what came off. Pads and adapters wear as a group, so ordering the set is usually the smart move. Ask about the companion hardware while you are at it.

Not sure this fits? Here's how to check

Pull the number off your lift's model plate first — model and serial both. Manufacturers run mid-cycle revisions that keep the model name but change hardware, so two lifts with the same name on the column can take different parts. The serial is what removes the guesswork.

Second check: compare the old part against this listing before you order. Length, mounting pattern, and thread sizes tell most of the story. If anything doesn't line up, or if the old part is too worn or broken to measure, call us with photos — we work on these lifts every week and can usually confirm fit from a picture and the lift's serial faster than you can dig through a parts diagram.

Why buy your Challenger lift adapter from Auto Lift Services

We install, inspect, and repair Challenger lifts every week — the 10347-10 is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.