The Challenger 2-2656 drive-up ramp is the direct replacement for the Challenger lift it came off of. This is the genuine Challenger part — same fit and same working specification as the one already on your lift. Ordering the Challenger drive-up ramp from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.

Specifications

• Part number: 2-2656
• Brand: Challenger
• Type: Genuine OEM drive-up ramp

Column hardware — the anchor bolts, arm-pin retainers, slide blocks, and fasteners — is what keeps the structure standing and the load where it belongs. It's easy to overlook because it's just "bolts," but a loose anchor lets a column shift, a worn arm-pin retainer lets an arm creep, and a stripped fastener has zero holding power in a shock load. On a lift, the small hardware is holding real weight.

Related parts for this lift

The parts below are commonly ordered alongside this one — cables, sheaves, seals, and hardware wear on similar schedules, and most repairs go faster when the whole set is done in one visit.

• Challenger 2-1380 Ramp Pin 18K 4-Post
• Challenger 2-1381 Weldment Ramp Pin 18K
• Challenger 2-1382 Ramp Skin 18K 4-Post
• Challenger 2-2655 Ramp Extension Skin
• Challenger 2-2779 Ramp Skin Formed
• Challenger 2-2994 Skin Extended Approach Ramp

Replacing your drive-up ramp

Swapping arm pads is one of the simplest jobs on a lift — pop the old pad, seat the new one in the arm's cup or bolt pattern — but it's also one of the most important, because the pad is what grips the car. Confirm the new pads match the arms and sit flush. Even so, the full procedure is worth a quick read before you put a vehicle back on them. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.

Find the right part for your lift

Landed here but not 100% sure it is your part? Grab the model and serial from the data plate and open our Challenger parts lookup for the visual breakdown — the manufacturer-style drawing with every item numbered so you can match yours exactly. Plate missing? our guide to finding your model number helps, and we identify lifts from photos every week if you would rather ask.

Signs this part is worn out

Check every arm-pin and adapter hole for wallowing. A round hole gone egg-shaped from load reversal lets the arm or adapter rock under the car, and the play only gets worse. Slip the pin in and feel for slop; sight the hole for an oval. An elongated bore in a carriage or arm is a structural condemn, not something you shim around.

Parts commonly replaced at the same time

While you are replacing this, check its companions: worn pads often ride with worn adapters and elongated pin bores. Replacing the set keeps the vehicle sitting square on the lift. Tell us your model and we will build the pad-and-adapter kit plus the mounting hardware so nothing is left worn.

Safety notes

The parts that touch the vehicle — pads, adapters, ramps, arm hardware — are what keep it from slipping off the lift. Once a pad is crushed, a lip is bent, or a pin hole has wallowed out, the safe grip is gone. Swap them at the first sign of wear rather than trusting a vehicle to a worn contact point.

Before you order

Get the structural order right by matching the old part: shape, size, and mounting style all vary by model. Most contact parts belong in sets, so replace them together for even support. Confirm model and serial when you call and we will make sure the fit is correct before it ships.

Ordering the right revision

Before this goes in the cart, grab two things off your lift: the model number and the serial number, both on the manufacturer's plate. The serial matters more than most people expect — lift makers revise components between production runs without renaming the lift, and the run your serial falls in determines which revision of this part is correct.

If you are working from a failed part rather than a plate, measure what you have and photograph how it mounts. Send that to us along with the lift brand, and we will check it against the same parts breakdowns our own techs use in the field before you commit to the order.

Why buy your Challenger drive-up ramp from Auto Lift Services

We install, inspect, and repair Challenger lifts every week — the 2-2656 is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.