The Challenger 80-0150 safety decal set is the direct replacement for the Challenger lift it came off of. This is the genuine Challenger part — same fit and same working specification as the one already on your lift. Ordering the Challenger safety decal set from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.

Specifications

• Part number: 80-0150
• Brand: Challenger
• Type: Genuine OEM safety decal set
• Fits: SRM10

This is a genuine lift replacement part, not a generic accessory — sized and specified to fit the equipment it belongs to. Every part on a lift, right down to the smallest, was chosen for a reason: a load it carries, a seal it makes, a function it serves. Matching the correct replacement to the actual lift is what keeps the machine working the way it was built to, and keeps it safe to put a vehicle on.

What lifts this safety decal set fits

This safety decal set fits the lift models below. Click a model to open its visual parts breakdown — the exploded drawing with every part numbered, so you can confirm this is the right part for your exact lift before you order.

• SRM10 — see the exploded parts breakdown for this lift

Related parts for this lift

The parts below are commonly ordered alongside this one — cables, sheaves, seals, and hardware wear on similar schedules, and most repairs go faster when the whole set is done in one visit.

• Challenger 80-0147 Caution Decal-engage Lock
• Challenger 80-0148 Warning Decal-keep Feet Clear
• Challenger 80-0151 Warning Decal-position Vehicle

Replacing your safety decal set

Most small-parts replacements go the same way: confirm the new part matches the old in size, rating, and function, install it in the correct location, and verify it does its job before the lift goes back to work. It's simple, but matching the right part is what keeps the lift correct. The full procedure covers the details. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.

Find the right part for your lift

The surest way to get the right part is to work from your lift's own breakdown. open our Challenger parts lookup, choose your model, and every part is mapped on the drawing with its number and price. If you cannot find the model plate, our guide to finding your model number explains where each lift type hides it, and our phone line is open if you want a hand.

Signs it's time to replace it

For decals, the test is simple: can you read them, and are they there? Capacity ratings, control labels, and safety warnings all have to be legible and in place. Faded, peeling, painted-over, or missing decals need replacing — an operator has to be able to read the load limit and the controls at a glance. A lift with unreadable safety markings isn't compliant, no matter how well the mechanicals work.

Parts commonly replaced at the same time

One order can cover more than one need. When you call, we can look at the full parts breakdown for your model and flag the companions worth adding now — the wear items and safety parts that tend to come due together. It saves freight and a second wait.

Safety notes

A lift is a system, and even its minor parts are specified for a reason. Order the right one for your model, install it as the manual directs, and keep safety and instruction decals legible. We would rather confirm the detail now than have you find out at inspection time.

Before you order

Ordering tip: have your model and serial ready even for the small parts, since fit and specification still vary by lift. Tell us what you are trying to solve and we will confirm the right item — a quick check now beats a wrong order and a second wait.

Check your lift's serial before ordering

The most common reason a lift part comes back is not a defect — it is a revision mismatch. Manufacturers change sub-parts between production runs while keeping the same lift model name, so "it fits my lift model" is not always enough. The model plate carries the serial number that pins your lift to a specific run, and that is the number that settles which version of this part belongs on your lift.

Can't find the plate? Measure the old part — overall length, bolt-hole spacing, thread size on anything threaded — and photograph it from a couple of angles. Send that with your lift's brand and rough age and we will match it against the parts breakdowns we service from every week.

Why buy your Challenger safety decal set from Auto Lift Services

We install, inspect, and repair Challenger lifts every week — the 80-0150 is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.