The Challenger CL16-IOM-W installation and operation manual is the direct replacement for the Challenger lift it came off of. This is the genuine Challenger part — same fit and same working specification as the one already on your lift. Ordering the Challenger installation and operation manual from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.

Specifications

• Part number: CL16-IOM-W
• Brand: Challenger
• Type: Genuine OEM installation and operation manual

These parts age on their own clocks. Airline tubing gets brittle from shop heat, oil, and UV until it cracks at a fitting; decals sun-fade and peel; hardware loosens under vibration and corrodes in damp air. The manual doesn't wear at all — it just goes missing. Keeping the small stuff fresh is cheap maintenance that keeps the lift legible, sealed, and torqued the way it was built to be.

Related parts for this lift

The parts below are commonly ordered alongside this one — cables, sheaves, seals, and hardware wear on similar schedules, and most repairs go faster when the whole set is done in one visit.

• Challenger CL16-IOM-A Install/oper/maint Manual Cl16

Replacing your installation and operation manual

Applying new decals is simple but not trivial: the surface has to be clean and dry, and the capacity and safety labels have to go in their correct, visible locations so an operator can read them at a glance. Take your time positioning them. The full procedure covers placement and prep. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.

Find the right part for your lift

Want to be sure before you buy? Pull the model and serial off your lift's plate and open our Challenger parts lookup to open the exploded parts breakdown for your model — find your part on the drawing and you know it fits. New to finding your model number? our guide to finding your model number covers it, or send a photo of the plate and we will read it for you.

Signs it's time to replace it

For the manual, make sure the lift has one and that it matches the model and serial range. The right manual carries the capacity, fluid spec, torque values, and the correct service procedure — the numbers you shouldn't be guessing at. If it's missing, get the correct one for the exact model before the next repair, because a lift serviced to guessed specs is a lift serviced wrong.

Parts commonly replaced at the same time

While you are ordering, let us check what commonly goes with it on your lift. Bundling the related parts into one shipment saves freight and time, and we can see the full breakdown for your model to make sure nothing obvious is missed. Just give us the model and serial.

Safety notes

Fit the right part and follow the manual — that holds even for the minor components. Required safety and instruction decals must stay legible for ALI compliance, and any accessory in the load path has to be rated for the job. When in doubt about what your model takes, ask before you order.

Before you order

Order by model and serial so we can match the correct version, and let us know the application. For decals and accessories especially, using the item specified for your lift keeps it compliant and safe. We will confirm the fit before it leaves the shelf.

Not sure this fits? Here's how to check

Pull the number off your lift's model plate first — model and serial both. Manufacturers run mid-cycle revisions that keep the model name but change hardware, so two lifts with the same name on the column can take different parts. The serial is what removes the guesswork.

Second check: compare the old part against this listing before you order. Length, mounting pattern, and thread sizes tell most of the story. If anything doesn't line up, or if the old part is too worn or broken to measure, call us with photos — we work on these lifts every week and can usually confirm fit from a picture and the lift's serial faster than you can dig through a parts diagram.

Why buy your Challenger installation and operation manual from Auto Lift Services

We install, inspect, and repair Challenger lifts every week — the CL16-IOM-W is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.