The Challenger CLHM-CA-15 is the direct-replacement lift adapter for the Challenger lift it came off of — the genuine part, same fit and same working specification as the one already on your lift. Ordering the Challenger lift adapter from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.

Specifications

• Part number: CLHM-CA-15
• Brand: Challenger
• Type: Genuine OEM lift adapter

A worn structural part is the difference between a car that sits solid and one that slides off a lift arm. A crushed pad, a bent adapter lip, an egg-shaped pin hole — each one lets the contact point shift under load, and a vehicle that shifts on the arms is a vehicle that can come off them. These parts are inexpensive next to the bodywork of a dropped car, or the person standing beside it.

Related parts for this lift

The parts below are commonly ordered alongside this one — cables, sheaves, seals, and hardware wear on similar schedules, and most repairs go faster when the whole set is done in one visit.

• Challenger CLHM-CART — Roll around adapter storage cart for CLHM- EL90 LP End Lift Adapter &
• Challenger CLHM-CB-15 — 15" Adapter Cross Beam Clhm-Cb-32A (Pair)
• Challenger CLHM-CB-19.5 — 19.5"Adapter Cross Beam Clhm-Cb-32A (Pair)
• Challenger CLHM-CB-32A — Crossbeam Adapter, 32,000 Lbs. Capacity

Replacing your lift adapter

Ramp and approach-part replacement is straightforward, but the part has to sit flush and lock where it should so it can't kick out under a car driving on. Check the hinges, stops, and retainers as you go. Because it's load-bearing at drive-on, the full procedure is worth following before you use it. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.

Find the right part for your lift

Landed here but not 100% sure it is your part? Grab the model and serial from the data plate and open our Challenger parts lookup for the visual breakdown — the manufacturer-style drawing with every item numbered so you can match yours exactly. Plate missing? our guide to finding your model number helps, and we identify lifts from photos every week if you would rather ask.

Signs this part is worn out

Go over the column hardware and anchors. Every anchor bolt should be tight and the base plate flat to the floor — a column you can rock, or an anchor backed out with a gap under the plate, is a serious problem. Check arm-pin retainers, gate stops, and fasteners for looseness, stripped threads, and missing pins. Loose column hardware lets the whole structure move under load.

Parts commonly replaced at the same time

Contact and locating parts usually wear as a group, so when you order this one, think about the set — the other three pads, the adapters that go with them, the pins and hardware that mount them. Doing the full set keeps the lift even and saves a second order. We will pull the matched group for your model.

Safety notes

Structural parts carry the vehicle's weight and locate it safely on the lift, so worn or damaged ones are a drop risk. A crushed arm pad, a bent ramp lip, or an egg-shaped mounting hole lets a load shift where it should stay put. Replace them before they move, and never load a lift with a compromised contact point.

Before you order

Have your model and serial handy, and think in sets: four arm pads, the matching adapters, the hardware that mounts them. Ordering the full set keeps the lift even and saves a second order. Send a photo of the old part if you are unsure which version your lift takes.

Not sure this fits? Here's how to check

Pull the number off your lift's model plate first — model and serial both. Manufacturers run mid-cycle revisions that keep the model name but change hardware, so two lifts with the same name on the column can take different parts. The serial is what removes the guesswork.

Second check: compare the old part against this listing before you order. Length, mounting pattern, and thread sizes tell most of the story. If anything doesn't line up, or if the old part is too worn or broken to measure, call us with photos — we work on these lifts every week and can usually confirm fit from a picture and the lift's serial faster than you can dig through a parts diagram.

Why buy your Challenger lift adapter from Auto Lift Services

We install, inspect, and repair Challenger lifts every week — the CLHM-CA-15 is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.