The Rotary FC5277-20 replacement part is the direct replacement for the Rotary lift it came off of. Cross-referenced as ALS-7514-03, it is the genuine Rotary part — same part number, same fit, and same working specification as the one already on your lift. Ordering the Rotary replacement part from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.
Specifications
- Part number: ALS-7514-03
- Brand: Rotary
- Type: Genuine OEM replacement part
- Fits: FC5269, FC5277, FC5278, FC5279, FC5655, FC5656, FC5657
Automotive lifts are supposed to be inspected annually, and inspectors work from a list: locks, cables, sheaves, hydraulics, arm restraints, decals, and the general condition of every load-bearing part. A part in the condition that put this page in front of you is exactly the kind of line item that turns an inspection into a to-do list. The shops that pass clean are not the ones with new lifts — they are the ones that replace worn parts when they find them instead of when the inspection report forces the issue. Fixing it now costs the part; fixing it after a failed inspection costs the part plus the downtime while the bay sits red-tagged.
Related parts for this lift
The parts below are commonly ordered alongside this one — cables, sheaves, seals, and hardware wear on similar schedules, and most repairs go faster when the whole set is done in one visit.
- In-Line Filter - Rotary FA3134-12
- Female Connector - Rotary FA3134-13
- Spacer - Rotary FC5843-3
- Roller Wheel - Rotary FC5185-51
- Roller Axle - Rotary FC67-29H
- Inner Guide - Rotary FC67-28H
Ordering the right revision
Before this goes in the cart, grab two things off your lift: the model number and the serial number, both on the manufacturer's plate. The serial matters more than most people expect — lift makers revise components between production runs without renaming the lift, and the run your serial falls in determines which revision of this part is correct.
If you are working from a failed part rather than a plate, measure what you have and photograph how it mounts. Send that to us along with the lift brand, and we will check it against the same parts breakdowns our own techs use in the field before you commit to the order.
Think like the inspector while you are in there: do the locks engage on every column, do the cables show fraying or cording, do the sheaves spin without wobble, does anything weep hydraulic fluid, and are the capacity and safety decals still legible? Each one is a five-second check, and together they are most of the annual inspection done early, on your schedule instead of the inspector’s.
If a lift is in bad enough shape that using it could hurt someone, the right move is taking it out of service at the breaker until it is repaired — not finishing the week on it. No job in the schedule is worth running a lift you already know is unsafe.
Why buy your Rotary replacement part from Auto Lift Services
We install, inspect, and repair Rotary lifts every week — the ALS-7514-03 is a part we handle in the shop, not a random SKU we drop-ship.
- The phone answers if you have a question mid-install — call 800-674-9302.
- We confirm the right part for your lift's serial and production year before you order.
- Every part ships as genuine Rotary — no aftermarket substitution unless you specifically ask for an aftermarket equivalent.
If you also need companion wear items — cables, sheaves, seals, hardware — for the same repair, use our parts lookup and we will build the whole kit for your lift so you order once and finish the job.
About this fc5277 roller spacer
Every order for the fc5277 roller spacer starts with a fitment confirmation. Two lifts of the same model can carry subtle revisions between production years, and a component that fits a rev-A lift may not fit a rev-B lift built two years later. Before your card is charged we verify the piece against the parts breakdown for your specific lift serial number. That five-minute step is the difference between the part arriving and being installed the same afternoon versus the wrong piece showing up and the shop losing a day of billable work.
Technical specification & installation notes
Cycle life on this piece depends heavily on operating conditions. In a typical commercial repair shop running 6-10 lifts per day, the fc5277 roller spacer should deliver five to eight years of service before showing measurable wear against the OEM inspection specification. In a high-volume tire or alignment shop running 20+ lifts per day per bay, expect service every three to five years. It is designed to be a serviceable component; when it does wear it wears within safe operating margins that trigger visible symptoms — drift, uneven wear, minor leakage — well before failure becomes a safety issue.
Shipping & ordering
Shipping runs 3-5 business days on standard ground to the lower 48 states. Expedited overnight and two-day options are available; call 800-674-9302 before ordering to quote expedited freight. We stock the fc5277 roller spacer in Iowa and ship same-day for orders confirmed before 2 PM Central. Orders that come in later than that or on a Friday afternoon pick up on the next business day. A tracking number gets emailed to the address on the order the moment the package leaves our dock.
Warranty coverage
Consumables and wear parts like this are covered under the manufacturer defect warranty for twelve months. Because the fc5277 roller spacer is a component that eventually needs replacement in normal operation, warranty coverage specifically addresses failure due to manufacturing defect, not failure due to normal end-of-life wear. Our team can help distinguish between the two on a phone call if there is any question after installation — call 800-674-9302 and describe the failure pattern; we will tell you honestly whether it looks like a warranty case.
Cross-reference & fitment
Alternate applications for the fc5277 roller spacer sometimes exist. Where a common part fits multiple lift models across a manufacturer's catalog, cross-reference sheets show the compatible models explicitly. If you are consolidating parts stock and want to know which of your lifts the piece covers, email the request to [email protected] with a list of the lift models in your bay — we return a compatibility grid showing which lifts accept the replacement and which need a different number.
Questions about the fc5277 roller spacer? Call our parts desk at 800-674-9302 or email [email protected]. We ship nationwide from our Iowa warehouse and answer fitment questions within one business day.
Roller Spacer - Rotary FC5277-20
Inspect your lift.
Free. In your browser.
Our free lift inspection walks your lift end to end and shows you exactly which parts you need — right on the exploded diagram. No signup, no charge.