The Rotary FJ5106 carriage component is the direct replacement for the Rotary lift it came off of. Cross-referenced as ALS-7515-65, it is the genuine Rotary part — same part number, same fit, and same working specification as the one already on your lift. Ordering the Rotary carriage component from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.
Specifications
- Part number: ALS-7515-65
- Brand: Rotary
- Type: Genuine OEM carriage component
- Fits: A10i, A10i EH-1, A10i EH-2, A8i, A8i EH-1, A8i EH-2, DCOA7, S10i, S10i EH-1, S10i EH-2, S10i EH-4, SP7
- Lift type: 2-post lift
Adapters take a beating because they're the parts techs handle every day — stacked, swapped, dropped, and driven over. A bent lip, a mushroomed top, or a cracked weld on a frame-cradle adapter comes from that daily handling as much as from load. Because they're small and get tossed in a pile, they're easy to grab without a second look — which is exactly how a bent one ends up under a car.
What lifts this carriage component fits
This carriage component fits the lift models below. Click a model to open its visual parts breakdown — the exploded drawing with every part numbered, so you can confirm this is the right part for your exact lift before you order.
- A10I — see the exploded parts breakdown for this lift
- A8I — see the exploded parts breakdown for this lift
- DCOA7 — see the exploded parts breakdown for this lift
- S10I — see the exploded parts breakdown for this lift
Replacing your carriage component
Ramp and approach-part replacement is straightforward, but the part has to sit flush and lock where it should so it can't kick out under a car driving on. Check the hinges, stops, and retainers as you go. Because it's load-bearing at drive-on, the full procedure is worth following before you use it. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.
Find the right part for your lift
The surest way to get the right part is to work from your lift's own breakdown. open our Rotary parts lookup, choose your model, and every part is mapped on the drawing with its number and price. If you cannot find the model plate, our guide to finding your model number explains where each lift type hides it, and our phone line is open if you want a hand.
Signs this part is worn out
Start with the pads. A good pad is thick, square, and grippy; a worn one is crushed flat, cracked through, torn at the edge, or hardened smooth so it no longer bites. If a pad is missing chunks, oil-soaked, or compressed past half its original height, replace it — a slick or crushed pad lets the vehicle's lift point slide right off the arm.
Parts commonly replaced at the same time
Contact and locating parts usually wear as a group, so when you order this one, think about the set — the other three pads, the adapters that go with them, the pins and hardware that mount them. Doing the full set keeps the lift even and saves a second order. We will pull the matched group for your model.
Safety notes
Structural parts carry the vehicle's weight and locate it safely on the lift, so worn or damaged ones are a drop risk. A crushed arm pad, a bent ramp lip, or an egg-shaped mounting hole lets a load shift where it should stay put. Replace them before they move, and never load a lift with a compromised contact point.
Before you order
Have your model and serial handy, and think in sets: four arm pads, the matching adapters, the hardware that mounts them. Ordering the full set keeps the lift even and saves a second order. Send a photo of the old part if you are unsure which version your lift takes.
Confirm this is the right part before you order
Lift manufacturers revise parts mid-production without changing the model name, so the same lift bought two years apart can take two different revisions of the same component. Before you order, find the model plate on the lift — on most 2-post lifts it rides on one of the columns at eye level, on 4-post lifts it is usually on a column or the power-unit side runway — and note the full model number and serial. The serial dates the lift to a production run, and that is what decides which revision fits.
If the plate is painted over or missing, take a photo of the part you are replacing next to a tape measure and send it to us. Between the dimensions, the mounting pattern, and what lift it came off of, we can almost always identify the exact part before you spend money on the wrong one.
Why buy your Rotary carriage component from Auto Lift Services
We install, inspect, and repair Rotary lifts every week — the ALS-7515-65 is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.
About this fj5106 shim slider
The fj5106 shim slider is a direct-fit replacement engineered to restore original manufacturer performance on the lift model it services. Every piece we ship carries the exact dimensional and material specifications the OEM published for that application. Fitment on this component is critical: it interfaces with adjacent hardware in ways that any deviation from spec can drive premature wear on nearby parts or trigger the lift's mechanical safety systems into an unexpected condition. Shops that source this from us instead of a generic aftermarket substitute consistently report zero fitment issues on first-time installation.
Technical specification & installation notes
Technical specification matches the OEM published dimensions to within manufacturing tolerance. When a shop installs the fj5106 shim slider correctly, the lift returns to factory-rated performance immediately — no break-in period, no cycle-count adjustment required. The lift's safety systems (mechanical locks, hydraulic pressure relief, and electrical interlocks) treat a correctly-installed replacement exactly as they would treat a factory-original component during initial commissioning. That parity is what lets us honor warranty coverage without asking for the lift's full operating history.
Shipping & ordering
Shipping runs 3-5 business days on standard ground to the lower 48 states. Expedited overnight and two-day options are available; call 800-674-9302 before ordering to quote expedited freight. We stock the fj5106 shim slider in Iowa and ship same-day for orders confirmed before 2 PM Central. Orders that come in later than that or on a Friday afternoon pick up on the next business day. A tracking number gets emailed to the address on the order the moment the package leaves our dock.
Warranty coverage
Consumables and wear parts like this are covered under the manufacturer defect warranty for twelve months. Because the fj5106 shim slider is a component that eventually needs replacement in normal operation, warranty coverage specifically addresses failure due to manufacturing defect, not failure due to normal end-of-life wear. Our team can help distinguish between the two on a phone call if there is any question after installation — call 800-674-9302 and describe the failure pattern; we will tell you honestly whether it looks like a warranty case.
Cross-reference & fitment
Alternate applications for the fj5106 shim slider sometimes exist. Where a common part fits multiple lift models across a manufacturer's catalog, cross-reference sheets show the compatible models explicitly. If you are consolidating parts stock and want to know which of your lifts the piece covers, email the request to [email protected] with a list of the lift models in your bay — we return a compatibility grid showing which lifts accept the replacement and which need a different number.
Questions about the fj5106 shim slider? Call our parts desk at 800-674-9302 or email [email protected]. We ship nationwide from our Iowa warehouse and answer fitment questions within one business day.
Shim and Slider Kit (1 carriage) - Rotary FJ5106
Parts that fit your lift
This Rotary part fits the lift models below. Click your model to see every part that fits it — handy for grabbing the wear items that usually go at the same time (cables, sheaves, pins, locks).
Browse all Rotary lift parts →Inspect your lift.
Free. In your browser.
Our free lift inspection walks your lift end to end and shows you exactly which parts you need — right on the exploded diagram. No signup, no charge.