The Quality Lift ALS-7358-58L is the direct-replacement replacement part for the Quality Lift lift it came off of — the genuine part, same fit and same working specification as the one already on your lift. Ordering the Quality Lift replacement part from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.
Specifications
- Part number: ALS-7358-58L
- Brand: Quality Lift
- Type: Genuine OEM replacement part
Most lift failures do not start with the big components. They start with a part like this one — something small that wore quietly until the load found the weak point. A worn pin lets a sheave wobble, the wobble chews the cable, and now a cheap part has turned into a cable job. A sticking valve, a thinned bushing, a fatigued spring: each one is a few dollars of steel guarding components that cost hundreds. Replacing wear parts on schedule — instead of when they announce themselves — is the cheapest maintenance a lift ever gets, and it is the difference between shops that fix lifts and shops that keep replacing the expensive parts downstream of the cheap one.
Related parts for this lift
The parts below are commonly ordered alongside this one — cables, sheaves, seals, and hardware wear on similar schedules, and most repairs go faster when the whole set is done in one visit.
Check your lift's serial before ordering
The most common reason a lift part comes back is not a defect — it is a revision mismatch. Manufacturers change sub-parts between production runs while keeping the same lift model name, so "it fits my lift model" is not always enough. The model plate carries the serial number that pins your lift to a specific run, and that is the number that settles which version of this part belongs on your lift.
Can't find the plate? Measure the old part — overall length, bolt-hole spacing, thread size on anything threaded — and photograph it from a couple of angles. Send that with your lift's brand and rough age and we will match it against the parts breakdowns we service from every week.
When one wear part is finished, look hard at what it touched. Metal shavings are the tell — where there are shavings, something has been grinding. Check the mating surfaces this part rode against for scoring, ovaled holes, and rounded edges, because a new part installed against a chewed-up mate wears out on an accelerated schedule and takes the blame for it.
Do not put a known-worn part back in because it looks serviceable enough — on a lift, “probably fine” is carrying somebody’s vehicle over somebody’s head. If it was worn enough to remove, it is worn enough to replace.
Why buy your Quality Lift replacement part from Auto Lift Services
We install, inspect, and repair Quality Lift lifts every week — the ALS-7358-58L is a part we handle in the shop, not a random SKU we drop-ship.
- The phone answers if you have a question mid-install — call 800-674-9302.
- We confirm the right part for your lift's serial and production year before you order.
- Every part ships as genuine Quality Lift — no aftermarket substitution unless you specifically ask for an aftermarket equivalent.
If you also need companion wear items — cables, sheaves, seals, hardware — for the same repair, use our parts lookup and we will build the whole kit for your lift so you order once and finish the job.
About this eq10 lift turf
The eq10 lift turf is a direct-fit replacement engineered to restore original manufacturer performance on the lift model it services. Every piece we ship carries the exact dimensional and material specifications the OEM published for that application. Fitment on this component is critical: it interfaces with adjacent hardware in ways that any deviation from spec can drive premature wear on nearby parts or trigger the lift's mechanical safety systems into an unexpected condition. Shops that source this from us instead of a generic aftermarket substitute consistently report zero fitment issues on first-time installation.
Technical specification & installation notes
Technical specification matches the OEM published dimensions to within manufacturing tolerance. When a shop installs the eq10 lift turf correctly, the lift returns to factory-rated performance immediately — no break-in period, no cycle-count adjustment required. The lift's safety systems (mechanical locks, hydraulic pressure relief, and electrical interlocks) treat a correctly-installed replacement exactly as they would treat a factory-original component during initial commissioning. That parity is what lets us honor warranty coverage without asking for the lift's full operating history.
Shipping & ordering
Freight covers the continental United States on all standard orders. We ship UPS or FedEx ground for parts under 30 lb; heavier assemblies quote at published carrier rates. International orders on the eq10 lift turf require a freight quote — email dimensions, weight, and destination country to [email protected] and we return a rate within one business day. Alaska, Hawaii, and US territories quote at published rates and typically take five to ten business days depending on carrier and destination.
Warranty coverage
Every eq10 lift turf sold through Automotive Lift Services carries a one-year manufacturer-defect warranty. If it fails within that window due to a defect in material or workmanship, we replace it at no charge. Damage from improper installation, use outside the lift's rated capacity, side-loading, or modifications to the parent lift are not covered. The warranty is documented on your original order receipt — retain that record for the coverage period. To submit a warranty claim, contact us with the order number and a photo of the failure at [email protected].
Cross-reference & fitment
Fitment on the eq10 lift turf is verified against the lift serial number when the order comes in. Even inside one manufacturer's catalog, a lift model built in one production year can carry subtle revisions from the same model built two or three years later. Sending us the lift serial number when you place the order — either in the order notes or in a follow-up email — lets us verify the piece against that specific serial's parts list. That five-minute step catches revision mismatches before shipping and prevents the delay of an incorrect delivery.
Questions about the eq10 lift turf? Call our parts desk at 800-674-9302 or email [email protected]. We ship nationwide from our Iowa warehouse and answer fitment questions within one business day.
Lift EQ10 Turf Tray Transition 3.6" to 2.8" x 40" - Quality
Inspect your lift.
Free. In your browser.
Our free lift inspection walks your lift end to end and shows you exactly which parts you need — right on the exploded diagram. No signup, no charge.