The Rotary N448BL replacement part is the direct replacement for the Rotary lift it came off of. Cross-referenced as ALS-7528-88, it is the genuine Rotary part — same part number, same fit, and same working specification as the one already on your lift. Ordering the Rotary replacement part from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.
Specifications
- Part number: ALS-7528-88
- Brand: Rotary
- Type: Genuine OEM replacement part
- Fits: SPO10, SPO12 EH-1, SPO12 EH-2, SPO7, SPO9, SPO9 EH-1 200 Series, SPO9 EH-2 200 Series, SPO9 EH-4 200 Series, SPOA10, SPOA10 EH-1, SPOA10 EH-2, SPOA7
- Lift type: 2-post lift
We are not a catalog that happens to list lift parts — our field techs install, inspect, and repair automotive lifts every week, and the parts on this site are the ones that come off our own service trucks. That changes what you get with the order. When you are not sure this is the right part, you can send a photo of your lift’s data tag and the failed part and get an answer from someone who has had that exact assembly apart. And when you hit something mid-job that the manual does not cover, the phone gets answered by people who have been under the same lift with the same wrench.
Related parts for this lift
The parts below are commonly ordered alongside this one — cables, sheaves, seals, and hardware wear on similar schedules, and most repairs go faster when the whole set is done in one visit.
- Radius Gauge - Rotary NP228
- L/R OH Assembly for 12" Col. (red) - Rotary N448RD
- Overhead Limit Bar - Rotary N415
- Long Slider Block - Rotary - N167-1
- Mech Overhead Retro for In Bay - Rotary - N468
- Barksdale Repair Kit - Rotary - KD70129
Ordering the right revision
Before this goes in the cart, grab two things off your lift: the model number and the serial number, both on the manufacturer's plate. The serial matters more than most people expect — lift makers revise components between production runs without renaming the lift, and the run your serial falls in determines which revision of this part is correct.
If you are working from a failed part rather than a plate, measure what you have and photograph how it mounts. Send that to us along with the lift brand, and we will check it against the same parts breakdowns our own techs use in the field before you commit to the order.
The habit our techs are trained into applies here: when you finish a repair, run the lift through full cycles — all the way up, onto the locks, all the way down — and watch and listen the whole way. Leaks, rubbing, scraping, and locks that engage late all show themselves in the first three cycles if you are paying attention, which is a much better time to find them than under the next customer vehicle.
If you get into the job and find more wrong than you expected, stop and reassess rather than improvising a way through — call us if you want a second opinion. Half-finished lift repairs are more dangerous than the original failure, because now the lift looks fixed.
Why buy your Rotary replacement part from Auto Lift Services
We install, inspect, and repair Rotary lifts every week — the ALS-7528-88 is a part we handle in the shop, not a random SKU we drop-ship.
- The phone answers if you have a question mid-install — call 800-674-9302.
- We confirm the right part for your lift's serial and production year before you order.
- Every part ships as genuine Rotary — no aftermarket substitution unless you specifically ask for an aftermarket equivalent.
If you also need companion wear items — cables, sheaves, seals, hardware — for the same repair, use our parts lookup and we will build the whole kit for your lift so you order once and finish the job.
About this n448bl col blue
Sourcing the correct n448bl col blue is not the spot a shop wants to gamble. This piece sits inside a load path the lift manufacturer engineered to specific tolerances, and a substitute that looks close but is off by even a small margin can transfer load onto a neighboring component that was not designed for it. We stock this exact part to the OEM specification the original manufacturer publishes, which is why techs who have been through a bad aftermarket cycle keep coming back to us for the same replacement whenever their next need comes up.
Technical specification & installation notes
Cycle life on this piece depends heavily on operating conditions. In a typical commercial repair shop running 6-10 lifts per day, the n448bl col blue should deliver five to eight years of service before showing measurable wear against the OEM inspection specification. In a high-volume tire or alignment shop running 20+ lifts per day per bay, expect service every three to five years. It is designed to be a serviceable component; when it does wear it wears within safe operating margins that trigger visible symptoms — drift, uneven wear, minor leakage — well before failure becomes a safety issue.
Shipping & ordering
Freight covers the continental United States on all standard orders. We ship UPS or FedEx ground for parts under 30 lb; heavier assemblies quote at published carrier rates. International orders on the n448bl col blue require a freight quote — email dimensions, weight, and destination country to [email protected] and we return a rate within one business day. Alaska, Hawaii, and US territories quote at published rates and typically take five to ten business days depending on carrier and destination.
Warranty coverage
Consumables and wear parts like this are covered under the manufacturer defect warranty for twelve months. Because the n448bl col blue is a component that eventually needs replacement in normal operation, warranty coverage specifically addresses failure due to manufacturing defect, not failure due to normal end-of-life wear. Our team can help distinguish between the two on a phone call if there is any question after installation — call 800-674-9302 and describe the failure pattern; we will tell you honestly whether it looks like a warranty case.
Cross-reference & fitment
Alternate applications for the n448bl col blue sometimes exist. Where a common part fits multiple lift models across a manufacturer's catalog, cross-reference sheets show the compatible models explicitly. If you are consolidating parts stock and want to know which of your lifts the piece covers, email the request to [email protected] with a list of the lift models in your bay — we return a compatibility grid showing which lifts accept the replacement and which need a different number.
Questions about the n448bl col blue? Call our parts desk at 800-674-9302 or email [email protected]. We ship nationwide from our Iowa warehouse and answer fitment questions within one business day.
L/R OH Assembly for 12" Col. (blue) - Rotary N448BL
Inspect your lift.
Free. In your browser.
Our free lift inspection walks your lift end to end and shows you exactly which parts you need — right on the exploded diagram. No signup, no charge.