The Rotary FJ692-1 lift adapter is the direct replacement for the Rotary lift it came off of. Cross-referenced as ALS-9760-26, it is the genuine Rotary part — same part number, same fit, and same working specification as the one already on your lift. Ordering the Rotary lift adapter from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.
Specifications
- Part number: ALS-9760-26
- Brand: Rotary
- Type: Genuine OEM lift adapter
An arm, its pad, and its adapters work as a stack, and the whole stack has to be sound to hold a car safely. A perfect arm with a crushed pad still slips; a good pad on a bent adapter still won't seat square. The carriage ties the arms to the column, and the column hardware ties everything to the structure. A weak link anywhere in that chain is a weak link under the whole vehicle.
Related parts for this lift
The parts below are commonly ordered alongside this one — cables, sheaves, seals, and hardware wear on similar schedules, and most repairs go faster when the whole set is done in one visit.
- Adapter/Sleeve Assy. (19") MKVI - Rotary FJ692
- Adapter/Sleeve Assy. (24") MKVI - Rotary FJ693
- Adapter base and Adapters - Rotary FJ2379
Replacing your lift adapter
Carriage or arm work is heavier structural repair — pins, retainers, slide blocks, and load-bearing welds all have to go back sound and correctly torqued. Photograph the assembly before you take it apart, and confirm nothing rocks or has play when it's back together. Since this is the steel carrying the vehicle, the full walkthrough is worth following start to finish. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.
Find the right part for your lift
The surest way to get the right part is to work from your lift's own breakdown. open our Rotary parts lookup, choose your model, and every part is mapped on the drawing with its number and price. If you cannot find the model plate, our guide to finding your model number explains where each lift type hides it, and our phone line is open if you want a hand.
Signs this part is worn out
On the carriage, check the slide blocks. Pull the lift up and look at the block faces; bare metal, deep scoring, or blocks worn thin mean the carriage is riding steel on steel and cocking in the column. Worn blocks change how the carriage sits, which loads the arm pins and the locks unevenly. Replace them before the carriage starts chewing the column.
Parts commonly replaced at the same time
The parts near this one share its job and its wear — pads, adapters, swivel pins, retaining hardware. Doing them together restores an even, secure grip on the vehicle and saves reopening the job later. Give us your model and serial and we will match the complete set.
Safety notes
A lift's contact and locating parts do quiet, critical work — holding a vehicle exactly where it belongs. Crushed pads, bent lips, and elongated holes all erode that hold. Replace worn structural parts promptly, torque mounting hardware to spec, and never load a lift onto a contact point you can see is compromised.
Before you order
Order structural parts by model and serial and in the right quantity — a single fresh pad among three flat ones does not help much. Match the part's shape and mount to the original, and add the mounting hardware if it is worn. We will confirm the correct version for your lift.
Check your lift's serial before ordering
The most common reason a lift part comes back is not a defect — it is a revision mismatch. Manufacturers change sub-parts between production runs while keeping the same lift model name, so "it fits my lift model" is not always enough. The model plate carries the serial number that pins your lift to a specific run, and that is the number that settles which version of this part belongs on your lift.
Can't find the plate? Measure the old part — overall length, bolt-hole spacing, thread size on anything threaded — and photograph it from a couple of angles. Send that with your lift's brand and rough age and we will match it against the parts breakdowns we service from every week.
Why buy your Rotary lift adapter from Auto Lift Services
We install, inspect, and repair Rotary lifts every week — the ALS-9760-26 is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.
About this fj692 adapter base
Every order for the fj692 adapter base starts with a fitment confirmation. Two lifts of the same model can carry subtle revisions between production years, and a component that fits a rev-A lift may not fit a rev-B lift built two years later. Before your card is charged we verify the piece against the parts breakdown for your specific lift serial number. That five-minute step is the difference between the part arriving and being installed the same afternoon versus the wrong piece showing up and the shop losing a day of billable work.
Technical specification & installation notes
Torque and installation notes for this component follow the manufacturer's service manual. Where a torque value is called out, use a calibrated torque wrench and follow the tightening sequence the manual publishes for that fastener location — many lift assemblies require star-pattern or crosswise tightening to distribute load evenly. Skipping that step is one of the most common reasons a correctly-sourced fj692 adapter base still ends up needing to be re-serviced within a year. Our tech line at 800-674-9302 will walk your installer through the procedure if the shop does not have the current service manual on hand.
Shipping & ordering
Freight covers the continental United States on all standard orders. We ship UPS or FedEx ground for parts under 30 lb; heavier assemblies quote at published carrier rates. International orders on the fj692 adapter base require a freight quote — email dimensions, weight, and destination country to [email protected] and we return a rate within one business day. Alaska, Hawaii, and US territories quote at published rates and typically take five to ten business days depending on carrier and destination.
Warranty coverage
Consumables and wear parts like this are covered under the manufacturer defect warranty for twelve months. Because the fj692 adapter base is a component that eventually needs replacement in normal operation, warranty coverage specifically addresses failure due to manufacturing defect, not failure due to normal end-of-life wear. Our team can help distinguish between the two on a phone call if there is any question after installation — call 800-674-9302 and describe the failure pattern; we will tell you honestly whether it looks like a warranty case.
Cross-reference & fitment
Cross-reference on the fj692 adapter base is straightforward: match the OEM part number from the lift's parts breakdown against the number on your original invoice. If the numbers match, the component fits. If your lift's parts breakdown lists a superseded or alternate number, we accept the superseded value on the phone as confirmation of fit. When a manufacturer has issued a running change during production, we track the change in our catalog so ordering by the older number automatically pulls the current-spec replacement.
Questions about the fj692 adapter base? Call our parts desk at 800-674-9302 or email [email protected]. We ship nationwide from our Iowa warehouse and answer fitment questions within one business day.
Adapter Base-19" Long - Rotary - FJ692-1
Inspect your lift.
Free. In your browser.
Our free lift inspection walks your lift end to end and shows you exactly which parts you need — right on the exploded diagram. No signup, no charge.