The Challenger 6-4045 safety decal set is the direct replacement for the Challenger lift it came off of. This is the genuine Challenger part — same fit and same working specification as the one already on your lift. Ordering the Challenger safety decal set from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.

Specifications

• Part number: 6-4045
• Brand: Challenger
• Type: Genuine OEM safety decal set
• Fits: 4018XFX
• Lift type: 4-post lift

On lifts that use air — for lock release or pneumatic engagement — the air supply is part of the safety system, not an accessory. A compressor or regulator that can't hold steady pressure means the locks don't actuate the way they're supposed to. The air side is simple, but it has one job that matters: deliver clean, regulated pressure on demand so the lock mechanism does exactly what the operator asks.

What lifts this safety decal set fits

This safety decal set fits the lift models below. Click a model to open its visual parts breakdown — the exploded drawing with every part numbered, so you can confirm this is the right part for your exact lift before you order.

• 4018XFX — see the exploded parts breakdown for this lift

Related parts for this lift

The parts below are commonly ordered alongside this one — cables, sheaves, seals, and hardware wear on similar schedules, and most repairs go faster when the whole set is done in one visit.

• Challenger 6-1637 Decal 4-Post Safety Locks
• Challenger 6-1764 12K Capacity Decal
• Challenger 6-3031 Decal Up
• Challenger 6-3032 Decal Down
• Challenger 6-3558 Decal Safety Release
• Challenger 6-3623 Decal Duty Cycle

Replacing your safety decal set

Applying new decals is simple but not trivial: the surface has to be clean and dry, and the capacity and safety labels have to go in their correct, visible locations so an operator can read them at a glance. Take your time positioning them. The full procedure covers placement and prep. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.

Find the right part for your lift

The surest way to get the right part is to work from your lift's own breakdown. open our Challenger parts lookup, choose your model, and every part is mapped on the drawing with its number and price. If you cannot find the model plate, our guide to finding your model number explains where each lift type hides it, and our phone line is open if you want a hand.

Signs it's time to replace it

For airlines, run the length looking for cracks, kinks, chafe points, and oil-swollen or brittle sections. Check every push-connect and threaded fitting for leaks — a quick spray of soapy water shows bubbles at a leak. Pull the lock release and confirm air actuates the pawls promptly; a soft, slow, or uneven release points to a leaking line, a bad fitting, or low supply pressure.

Parts commonly replaced at the same time

While you are ordering, let us check what commonly goes with it on your lift. Bundling the related parts into one shipment saves freight and time, and we can see the full breakdown for your model to make sure nothing obvious is missed. Just give us the model and serial.

Safety notes

Fit the right part and follow the manual — that holds even for the minor components. Required safety and instruction decals must stay legible for ALI compliance, and any accessory in the load path has to be rated for the job. When in doubt about what your model takes, ask before you order.

Before you order

Order by model and serial so we can match the correct version, and let us know the application. For decals and accessories especially, using the item specified for your lift keeps it compliant and safe. We will confirm the fit before it leaves the shelf.

Not sure this fits? Here's how to check

Pull the number off your lift's model plate first — model and serial both. Manufacturers run mid-cycle revisions that keep the model name but change hardware, so two lifts with the same name on the column can take different parts. The serial is what removes the guesswork.

Second check: compare the old part against this listing before you order. Length, mounting pattern, and thread sizes tell most of the story. If anything doesn't line up, or if the old part is too worn or broken to measure, call us with photos — we work on these lifts every week and can usually confirm fit from a picture and the lift's serial faster than you can dig through a parts diagram.

Why buy your Challenger safety decal set from Auto Lift Services

We install, inspect, and repair Challenger lifts every week — the 6-4045 is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.