The Rotary JK1155-1 replacement part is the direct replacement for the Rotary lift it came off of. Cross-referenced as ALS-9762-07, it is the genuine Rotary part — same part number, same fit, and same working specification as the one already on your lift. Ordering the Rotary replacement part from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.
Specifications
- Part number: ALS-9762-07
- Brand: Rotary
- Type: Genuine OEM replacement part
- Fits: DRT10A MKII, DRT10A MKVI, DRT10H MKII, DRT10H MKVI
- Lift type: inground lift
Automotive lifts are supposed to be inspected annually, and inspectors work from a list: locks, cables, sheaves, hydraulics, arm restraints, decals, and the general condition of every load-bearing part. A part in the condition that put this page in front of you is exactly the kind of line item that turns an inspection into a to-do list. The shops that pass clean are not the ones with new lifts — they are the ones that replace worn parts when they find them instead of when the inspection report forces the issue. Fixing it now costs the part; fixing it after a failed inspection costs the part plus the downtime while the bay sits red-tagged.
Related parts for this lift
The parts below are commonly ordered alongside this one — cables, sheaves, seals, and hardware wear on similar schedules, and most repairs go faster when the whole set is done in one visit.
- 10-5/8" Seal and Wiper (1-piece) - Rotary JK238
- DRT10A - Semi-Hydraulic - Rotary JK1154-1
- Right Hand Yoke - Rotary FJ2232
- Seal 10" Wiper - Rotary - JK231
- Seal 10-5/8" High Pressure - Rotary - JK232
- Seal & Gland Spacer Kit 1" Thick - Rotary - JK236
Ordering the right revision
Before this goes in the cart, grab two things off your lift: the model number and the serial number, both on the manufacturer's plate. The serial matters more than most people expect — lift makers revise components between production runs without renaming the lift, and the run your serial falls in determines which revision of this part is correct.
If you are working from a failed part rather than a plate, measure what you have and photograph how it mounts. Send that to us along with the lift brand, and we will check it against the same parts breakdowns our own techs use in the field before you commit to the order.
Think like the inspector while you are in there: do the locks engage on every column, do the cables show fraying or cording, do the sheaves spin without wobble, does anything weep hydraulic fluid, and are the capacity and safety decals still legible? Each one is a five-second check, and together they are most of the annual inspection done early, on your schedule instead of the inspector’s.
If a lift is in bad enough shape that using it could hurt someone, the right move is taking it out of service at the breaker until it is repaired — not finishing the week on it. No job in the schedule is worth running a lift you already know is unsafe.
Why buy your Rotary replacement part from Auto Lift Services
We install, inspect, and repair Rotary lifts every week — the ALS-9762-07 is a part we handle in the shop, not a random SKU we drop-ship.
- The phone answers if you have a question mid-install — call 800-674-9302.
- We confirm the right part for your lift's serial and production year before you order.
- Every part ships as genuine Rotary — no aftermarket substitution unless you specifically ask for an aftermarket equivalent.
If you also need companion wear items — cables, sheaves, seals, hardware — for the same repair, use our parts lookup and we will build the whole kit for your lift so you order once and finish the job.
About this jk1155 drt full
Sourcing the correct jk1155 drt full is not the spot a shop wants to gamble. This piece sits inside a load path the lift manufacturer engineered to specific tolerances, and a substitute that looks close but is off by even a small margin can transfer load onto a neighboring component that was not designed for it. We stock this exact part to the OEM specification the original manufacturer publishes, which is why techs who have been through a bad aftermarket cycle keep coming back to us for the same replacement whenever their next need comes up.
Technical specification & installation notes
Cycle life on this piece depends heavily on operating conditions. In a typical commercial repair shop running 6-10 lifts per day, the jk1155 drt full should deliver five to eight years of service before showing measurable wear against the OEM inspection specification. In a high-volume tire or alignment shop running 20+ lifts per day per bay, expect service every three to five years. It is designed to be a serviceable component; when it does wear it wears within safe operating margins that trigger visible symptoms — drift, uneven wear, minor leakage — well before failure becomes a safety issue.
Shipping & ordering
Freight covers the continental United States on all standard orders. We ship UPS or FedEx ground for parts under 30 lb; heavier assemblies quote at published carrier rates. International orders on the jk1155 drt full require a freight quote — email dimensions, weight, and destination country to [email protected] and we return a rate within one business day. Alaska, Hawaii, and US territories quote at published rates and typically take five to ten business days depending on carrier and destination.
Warranty coverage
Return policy on the jk1155 drt full follows our store-wide standard: all parts sales are final; exchanges only if the piece arrives defective. In the case of a defective delivery, ship the failed piece back to us at your cost, we verify the defect on receipt, and ship a replacement at ours. Wrong-item deliveries where we made the shipping error follow a different path — we reimburse the return shipping cost and cover freight on the correct part. Contact [email protected] with the order number to start either process.
Cross-reference & fitment
Fitment on the jk1155 drt full is verified against the lift serial number when the order comes in. Even inside one manufacturer's catalog, a lift model built in one production year can carry subtle revisions from the same model built two or three years later. Sending us the lift serial number when you place the order — either in the order notes or in a follow-up email — lets us verify the piece against that specific serial's parts list. That five-minute step catches revision mismatches before shipping and prevents the delay of an incorrect delivery.
Questions about the jk1155 drt full? Call our parts desk at 800-674-9302 or email [email protected]. We ship nationwide from our Iowa warehouse and answer fitment questions within one business day.
DRT10H - Full Hydraulic - Rotary JK1155-1
Parts that fit your lift
This Rotary part fits the lift models below. Click your model to see every part that fits it — handy for grabbing the wear items that usually go at the same time (cables, sheaves, pins, locks).
Browse all Rotary lift parts →Inspect your lift.
Free. In your browser.
Our free lift inspection walks your lift end to end and shows you exactly which parts you need — right on the exploded diagram. No signup, no charge.