The Challenger A2010-I-06 column component is the direct replacement for the Challenger lift it came off of. This is the genuine Challenger part — same fit and same working specification as the one already on your lift. Ordering the Challenger column component from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.

Specifications

• Part number: A2010-I-06
• Brand: Challenger
• Type: Genuine OEM column component

Column hardware — the anchor bolts, arm-pin retainers, slide blocks, and fasteners — is what keeps the structure standing and the load where it belongs. It's easy to overlook because it's just "bolts," but a loose anchor lets a column shift, a worn arm-pin retainer lets an arm creep, and a stripped fastener has zero holding power in a shock load. On a lift, the small hardware is holding real weight.

Related parts for this lift

The parts below are commonly ordered alongside this one — cables, sheaves, seals, and hardware wear on similar schedules, and most repairs go faster when the whole set is done in one visit.

• Challenger A2010-I Idler Column Weldment-Cl10
• Challenger A2010-I-04 Idler Column Weldment-Cl10
• Challenger A2010-I-10 Idler Column Weldment Cl10 Green
• Challenger A2010-I-67 Idler Column Weldment-Cl10
• Challenger A2010-P Power Column Weldment-Cl10
• Challenger A2010-P-02 Power Column Weldment Cl10 Black

Replacing your column component

Carriage or arm work is heavier structural repair — pins, retainers, slide blocks, and load-bearing welds all have to go back sound and correctly torqued. Photograph the assembly before you take it apart, and confirm nothing rocks or has play when it's back together. Since this is the steel carrying the vehicle, the full walkthrough is worth following start to finish. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.

Find the right part for your lift

Landed here but not 100% sure it is your part? Grab the model and serial from the data plate and open our Challenger parts lookup for the visual breakdown — the manufacturer-style drawing with every item numbered so you can match yours exactly. Plate missing? our guide to finding your model number helps, and we identify lifts from photos every week if you would rather ask.

Signs this part is worn out

Check every arm-pin and adapter hole for wallowing. A round hole gone egg-shaped from load reversal lets the arm or adapter rock under the car, and the play only gets worse. Slip the pin in and feel for slop; sight the hole for an oval. An elongated bore in a carriage or arm is a structural condemn, not something you shim around.

Parts commonly replaced at the same time

The parts near this one share its job and its wear — pads, adapters, swivel pins, retaining hardware. Doing them together restores an even, secure grip on the vehicle and saves reopening the job later. Give us your model and serial and we will match the complete set.

Safety notes

A lift's contact and locating parts do quiet, critical work — holding a vehicle exactly where it belongs. Crushed pads, bent lips, and elongated holes all erode that hold. Replace worn structural parts promptly, torque mounting hardware to spec, and never load a lift onto a contact point you can see is compromised.

Before you order

Order structural parts by model and serial and in the right quantity — a single fresh pad among three flat ones does not help much. Match the part's shape and mount to the original, and add the mounting hardware if it is worn. We will confirm the correct version for your lift.

Ordering the right revision

Before this goes in the cart, grab two things off your lift: the model number and the serial number, both on the manufacturer's plate. The serial matters more than most people expect — lift makers revise components between production runs without renaming the lift, and the run your serial falls in determines which revision of this part is correct.

If you are working from a failed part rather than a plate, measure what you have and photograph how it mounts. Send that to us along with the lift brand, and we will check it against the same parts breakdowns our own techs use in the field before you commit to the order.

Why buy your Challenger column component from Auto Lift Services

We install, inspect, and repair Challenger lifts every week — the A2010-I-06 is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.