The Challenger A2010-P column component is the direct replacement for the Challenger lift it came off of. This is the genuine Challenger part — same fit and same working specification as the one already on your lift. Ordering the Challenger column component from us gets you the OEM piece that matches the lift, not an aftermarket knock-off that is close but not the same.

Specifications

• Part number: A2010-P
• Brand: Challenger
• Type: Genuine OEM column component
• Fits: CL10, CL10DPC, CL10V3

Adapters take a beating because they're the parts techs handle every day — stacked, swapped, dropped, and driven over. A bent lip, a mushroomed top, or a cracked weld on a frame-cradle adapter comes from that daily handling as much as from load. Because they're small and get tossed in a pile, they're easy to grab without a second look — which is exactly how a bent one ends up under a car.

What lifts this column component fits

This column component fits the lift models below. Click a model to open its visual parts breakdown — the exploded drawing with every part numbered, so you can confirm this is the right part for your exact lift before you order.

• CL10 — see the exploded parts breakdown for this lift
• CL10DPC — see the exploded parts breakdown for this lift
• CL10V3 — see the exploded parts breakdown for this lift

Related parts for this lift

The parts below are commonly ordered alongside this one — cables, sheaves, seals, and hardware wear on similar schedules, and most repairs go faster when the whole set is done in one visit.

• Challenger A2010-I Idler Column Weldment-Cl10
• Challenger A2010-I-04 Idler Column Weldment-Cl10
• Challenger A2010-I-06 Idler Column Weldment-Cl10
• Challenger A2010-I-10 Idler Column Weldment Cl10 Green
• Challenger A2010-I-67 Idler Column Weldment-Cl10
• Challenger A2010-P-02 Power Column Weldment Cl10 Black

Replacing your column component

Ramp and approach-part replacement is straightforward, but the part has to sit flush and lock where it should so it can't kick out under a car driving on. Check the hinges, stops, and retainers as you go. Because it's load-bearing at drive-on, the full procedure is worth following before you use it. Not sure on the procedure? Find your lift in our parts lookup or call and we will walk you through it.

Find the right part for your lift

The surest way to get the right part is to work from your lift's own breakdown. open our Challenger parts lookup, choose your model, and every part is mapped on the drawing with its number and price. If you cannot find the model plate, our guide to finding your model number explains where each lift type hides it, and our phone line is open if you want a hand.

Signs this part is worn out

Start with the pads. A good pad is thick, square, and grippy; a worn one is crushed flat, cracked through, torn at the edge, or hardened smooth so it no longer bites. If a pad is missing chunks, oil-soaked, or compressed past half its original height, replace it — a slick or crushed pad lets the vehicle's lift point slide right off the arm.

Parts commonly replaced at the same time

Contact and locating parts usually wear as a group, so when you order this one, think about the set — the other three pads, the adapters that go with them, the pins and hardware that mount them. Doing the full set keeps the lift even and saves a second order. We will pull the matched group for your model.

Safety notes

Structural parts carry the vehicle's weight and locate it safely on the lift, so worn or damaged ones are a drop risk. A crushed arm pad, a bent ramp lip, or an egg-shaped mounting hole lets a load shift where it should stay put. Replace them before they move, and never load a lift with a compromised contact point.

Before you order

Have your model and serial handy, and think in sets: four arm pads, the matching adapters, the hardware that mounts them. Ordering the full set keeps the lift even and saves a second order. Send a photo of the old part if you are unsure which version your lift takes.

Not sure this fits? Here's how to check

Pull the number off your lift's model plate first — model and serial both. Manufacturers run mid-cycle revisions that keep the model name but change hardware, so two lifts with the same name on the column can take different parts. The serial is what removes the guesswork.

Second check: compare the old part against this listing before you order. Length, mounting pattern, and thread sizes tell most of the story. If anything doesn't line up, or if the old part is too worn or broken to measure, call us with photos — we work on these lifts every week and can usually confirm fit from a picture and the lift's serial faster than you can dig through a parts diagram.

Why buy your Challenger column component from Auto Lift Services

We install, inspect, and repair Challenger lifts every week — the A2010-P is a part we handle in the shop, not a random SKU we drop-ship. The phone answers if you have a question mid-install — call 800-674-9302 — and every part ships genuine, no aftermarket substitution unless you ask for it.